Luftstrom

  Logo Luftstrom

Fast Switching and Bidirectional Charger based on Gallium Nitride Semiconductors

In the public funded project “Luftstrom” a single phase and bidirectional charger based on wide bandgap (WBG) devices gets developed and investigated. With an increase of the switching frequency, the charger can be build much smaller than based on commercial charging systems with silicon devices. During charging process, the grid voltage is rectified by an ac-dc converter. A dc-dc converter ensures galvanic isolation between the grid and the battery in the vehicle. Additionally, this converter links the dc-link voltage with the battery voltage. The mean power is 3.7 kW. Based on the single-phase topology of the charging system the power in the dc-link fluctuates with 100 Hz, which results in twice the nominal power as peak power that has to be transferred by the ac-dc converter. The system is controlled by a combination of a DSP and FPGA with switching frequencies up to 500 kHz. By using GaN devices, the volume of the whole charger could be reduced by more than 50 % compared to a charger based on silicon devices.

Contact

Markus  Neubert

Name

Markus Neubert

Oberingenieur Leistungselektronik und Elektrische Antriebe

Telephone

work Phone
+49 241 80 99606

E-Mail

 

Duration

01.01.2015 – 31.12.2017

 
 

Funding

Federal Ministry of Education and Research
 
 

Partners

German National Platform for Electric Mobility